AquaProTec™ Pro 48K Complete City Water System

The "Invisible" Damage Chlorine and Hardness Create Together

City water arrives treated and disinfected, but it often contains two persistent problems: chlorine used for microbial control and hardness minerals that form scale. While each creates its own issues - chlorine affects taste, odor, and skin comfort, while hardness causes appliance damage and plumbing buildup - it is the combination that creates the most serious long-term consequences. Chlorine dries skin and hair during showering, and when combined with hard water, soap becomes less effective, requiring more product and leaving stubborn residue behind. Inside your plumbing, hard water scale traps chlorine and disinfection byproducts against surfaces, accelerating corrosion and reducing equipment lifespan.

The AquaProTec™ Pro 48K City Water Softening Whole House Bundle addresses both issues with precision engineering. This system combines three stages of coordinated treatment designed for moderate hardness and typical chlorine exposure found in municipal supplies. The first stage captures sediment and particulate debris before water reaches downstream treatment equipment. The second stage employs INDOCARB® E124 Catalytic Carbon - a high-performance media specifically engineered to reduce chlorine, chloramines, VOCs, and taste and odor compounds that city water frequently contains. The final treatment stage utilizes Aldex C-800 10% cross-linked resin to remove calcium and magnesium hardness minerals, preventing scale formation while protecting water heaters, fixtures, and appliances throughout the home. To better understand how whole house water softeners protect plumbing and appliances, consider how untreated city water gradually reduces efficiency in every system that uses water.

The Certified Engineering Behind 48,000-Grain Capacity

This system delivers 48,000 grains of softening capacity through precision-manufactured components designed for consistent, long-term operation. The mineral tank measures 10 inches in diameter by 54 inches in height and contains 1.5 cubic feet of Aldex C-800 resin - a 10% cross-linked cation exchange media that achieves high hardness removal efficiency while resisting fouling and maintaining structural integrity over time. This capacity is designed for households of 2 to 3 occupants or homes up to approximately 1,500 square feet where moderate daily water use and typical municipal hardness levels are present. The system is controlled by a WS-Clack WS1 digital valve that manages regeneration cycles based on actual water usage, reducing salt and water waste while ensuring soft water availability when needed.

All primary components are manufactured in the United States and carry NSF/ANSI certifications, including Standard 44 for water softening performance, Standard 61 for material safety, and WQA Gold Seal validation for independent third-party verification. The INDOCARB® E124 Catalytic Carbon stage operates through a separate Clack WS1 valve and provides superior chlorine and chloramine reduction compared to standard granular activated carbon. The system supports flow rates up to 27 gallons per minute at a 15 PSI pressure drop, allowing simultaneous water use across multiple fixtures without noticeable performance loss. Operating pressure range is specified between 20 and 125 PSI, with optimal performance occurring between 50 and 70 PSI - typical for most two-story residential installations supplied by municipal water systems. For homes requiring broader protection against iron and sulfur odors commonly found in well water, explore iron and sulfur removal systems designed for more complex groundwater conditions.

Pure Water Living Without Compromises

When city water is treated correctly at the point of entry, the difference becomes immediately noticeable. Water feels softer during showers, with soap lathering fully and rinsing cleanly without leaving residue on skin or hair. Coffee and tea taste cleaner, without the chemical notes chlorine introduces. Dishes emerge from the dishwasher without spotting or film, and laundry retains color and softness longer because detergents work as intended in softened, dechlorinated water. Behind the scenes, water heaters operate more efficiently without scale insulation reducing heat transfer, and faucets, showerheads, and appliance valves remain free of mineral buildup that restricts flow and causes premature failure.

This system includes the AQUAREX™ sediment prefilter to protect downstream equipment, the INDOCARB® E124 catalytic carbon stage for chlorine and organic contaminant reduction, the EVOSOFT™ water softener for hardness removal, and the AquaVRay™ UV disinfection system for microbial protection - delivering complete, whole-house water treatment in a single coordinated installation. Because every component is designed to work together, maintenance becomes straightforward: add salt to the brine tank as needed, replace the sediment filter cartridge periodically, and replace the UV lamp annually. There are no complicated schedules or conflicting service requirements. This is water treatment done correctly. Pure Water. Pure Trust.

Performance

• Ideal For: Two-story homes (with standard water pressure 50–70 PSI)
• System Capacity: 48,000 Grains
• Occupants: 2-3
• Household Size: Up to ~1,500 sq ft
• Number of Bathrooms: 1-2
• Media Volume: 1.5 Cu.Ft
• Media Type: Carbon - INDOCARB® E124, Water Softener - Aldex C-800 10% Crosslinked Resin
• Service Life: ~ 10-15 years
• Max Flow Rate: 27 gpm at 15 psi drop
• Backwash: 2.7 gpm

Technical Specifications

• Valve: WS-Clack WS1 Valve, Carbon Clack WS1 Valve
• Input & Output Line Size: ¾” or 1” NPT
• Tank Dimensions: 10"x54"
• Brine Tank Size: 18"X36" Gray
• Product Dimensions: 60"L × 24"W × 65"H
• Product Weight: 327 lb, 148 kg
• Material: N/A
• Power Requirement: 110V Standard (Plug-In Transformer Included)
• Bypass Valve Included: Yes
• Drain Line: ¾” or 1” NPT

Additional Components

• 1/2" Dia drain line tube 20' in length

Installation Time & Requirements

• Installation Type: Whole-House Point of Entry
• Estimated Installation Time: A professional water softener installation typically takes 3 to 6 hours, but this can vary depending on the complexity of the job and the type of system. Replacing an existing unit might take less time, sometimes as little as an hour, while a new installation with additional plumbing will take longer.

Most AQUALIVIA™ systems are built or assembled to order at our Florida facility.

• Standard orders ship in 2 to 4 business days

• Custom or special systems may require 7 to 10 business days

• Orders placed after 12:00 PM ET process the next business day

Estimated Transit Times (after shipment)

• Ground: 5 to 10 business days

• Freight systems: 5 to 10 business days

Free Shipping

Free standard shipping on orders over $99 within the continental U.S.

Freight Delivery

Large systems ship via pallet freight. An adult must be present to inspect and sign.

Inspection

Please inspect your order upon delivery and report any damage within 3 business days.

International Orders

International shipping is available. Duties and taxes are the customer’s responsibility. All international sales are final unless covered by warranty.

Warranty:

At AQUALIVIA™, we stand behind the quality of our water treatment systems. Every product is carefully built to last, and we’re proud to offer strong warranty coverage to give you peace of mind.

What’s Covered

• Mineral Tanks: 10 years (up to 13" × 54"), 5 years for larger tanks.
• Control Valves: 5 years.
• Brine Tanks: 5 years.
• Accessories & Components: 1 year.
• AQUAREX™ Whole House Filter: 5 years.
• OZONEX™ Ozone Systems: 1 year.
• AquaVRay™ UV Systems: 1 year.
• HydroClear™: 1 year(system only)
• AquaRevive™ RO Systems: 1 year(system only)

What’s Not Covered

• Regular-use consumables (filters, resins, membranes, UV lamps, cartridges).
• Damage caused by misuse, freezing, flooding, power surges, or improper installation.
• Products used with non-AQUALIVIA™ parts or outside normal water conditions.

Our Promise

We’ll repair, replace, or provide a comparable solution if your system has a covered defect. Our goal is to make sure your AQUALIVIA™ system works the way it should, so you can enjoy clean, pure water with confidence.

👉 For warranty support, please contact Info@AquaLivia.com.

Maintenance Requirement: