AquaProTec™ Ultra 64K City Water Softening System

Hard Water, Chlorine, and Sediment Demand a Coordinated Defense

City water delivers convenience, but it rarely delivers purity. Municipal treatment disinfects water with chlorine to protect public health, yet that same chlorine follows water into your home, affecting taste, drying skin, and corroding plumbing over time. Hardness minerals—calcium and magnesium—pass through city systems unchanged, slowly forming limescale inside water heaters, reducing appliance efficiency, and leaving chalky residue on fixtures. Sediment from aging pipes, construction, and distribution networks adds another layer of wear, clogging valves and shortening equipment lifespan.

Most homeowners address these issues separately, installing a softener for scale, a filter for sediment, or dealing with chlorine taste only at the kitchen sink. That approach leaves gaps. Chlorine still irritates skin in the shower. Sediment still wears down appliances. Hardness still damages the water heater. The AquaProTec™ Ultra 64K City Water Softener Whole House Bundle eliminates those gaps by treating city water comprehensively at the point of entry, protecting every fixture, appliance, and tap from the damage that municipal water quietly delivers daily.

Three-Stage Engineering for Total City Water Control

This system follows a deliberate sequence designed to protect downstream equipment and maximize treatment efficiency. Water first passes through the AQUAREX™ Sediment Filter, removing sand, rust particles, and debris that would otherwise clog valves and scratch fixtures. Sediment removal is not optional—it protects the precision components that follow and ensures consistent flow throughout the home.

From there, water enters the AquaProTec™ INDOCARB® E124 Catalytic Carbon Filter, where advanced media addresses chlorine, chloramines, volatile organic compounds, disinfection byproducts, and taste and odor issues. INDOCARB® E124 is not standard granular carbon. It is catalytic carbon, engineered to break down chloramines—a compound standard carbon cannot remove effectively—while maintaining high flow rates and long service life. This stage restores water to a neutral state, free from chemical smells, off-flavors, and irritants that affect skin and respiratory comfort.

The final stage is the EVOSOFT™ 64,000-Grain Water Softener, equipped with high-capacity Aldex C-800 10% Crosslinked Resin. This resin removes calcium and magnesium through ion exchange, preventing scale formation before it hardens inside pipes and appliances. Crosslinked resin resists fouling and maintains exchange capacity longer than standard resin, critical in city water systems where hardness levels remain consistent and demand is continuous. The Clack WS1 valve regenerates only when needed, monitored by real-time flow data, reducing salt and water waste while ensuring softening performance does not degrade over time.

Each stage is sequenced for maximum effectiveness and protection. Sediment is removed first to preserve carbon and resin media. Chlorine is neutralized before it can oxidize the softening resin. Hardness is removed last, after chemical interference has been eliminated. This is not a collection of separate filters—it is a coordinated defense system built to handle the specific challenges of treated municipal water.

Pure Water. Pure Trust.

Clean, soft water changes how a home functions. Showers feel gentler. Soap lathers easily and rinses completely. Dishes come out of the dishwasher without spots. Laundry softens without extra additives. Coffee tastes like coffee, not chlorine. Water heaters operate at full efficiency, protected from the mineral buildup that causes early failure and drives up energy costs. Plumbing remains clear, valves stay functional, and appliances last years longer.

The AquaProTec™ Ultra 64K Bundle is built in the United States with NSF-certified components and backed by a warranty that reflects the durability homeowners expect from professional-grade equipment. This is water treatment that performs predictably, day after day, without guesswork or compromise. For homes facing the combined challenges of city water hardness, chlorine exposure, and sediment contamination, this system delivers total protection with the confidence that comes from deliberate, tested engineering. Pure Water. Pure Trust.

Performance

• Ideal For: Two-story homes (with standard water pressure 50–70 PSI)
• System Capacity: 64,000 Grains
• Occupants: 2-4
• Household Size: Up to ~2,200 sq ft
• Number of Bathrooms: 2-3
• Media Volume: 2 Cu.Ft
• Media Type: Carbon - INDOCARB® E124, Water Softener - Aldex C-800 10% Crosslinked Resin
• Service Life: ~ 10-15 years
• Max Flow Rate: 27 gpm at 15 psi drop
• Backwash: 4 gpm

Technical Specifications

• Valve: WS-Clack WS1 Valve, Carbon Clack WS1 Valve
• Input & Output Line Size: ¾” or 1” NPT
• Tank Dimensions: 12"x52"
• Brine Tank Size: 18"X36" Gray
• Product Dimensions: 66"L × 26"W × 66"H
• Product Weight: 395 lb, 179 kg
• Material: N/A
• Power Requirement: 110V Standard (Plug-In Transformer Included)
• Bypass Valve Included: Yes
• Drain Line: ¾” or 1” NPT

Additional Components

• 1/2" Dia drain line tube 20' in length

Installation Time & Requirements

• Installation Type: Whole-House Point of Entry
• Estimated Installation Time: A professional water softener installation typically takes 3 to 6 hours, but this can vary depending on the complexity of the job and the type of system. Replacing an existing unit might take less time, sometimes as little as an hour, while a new installation with additional plumbing will take longer.

Most AQUALIVIA™ systems are built or assembled to order at our Florida facility.

• Standard orders ship in 2 to 4 business days

• Custom or special systems may require 7 to 10 business days

• Orders placed after 12:00 PM ET process the next business day

Estimated Transit Times (after shipment)

• Ground: 5 to 10 business days

• Freight systems: 5 to 10 business days

Free Shipping

Free standard shipping on orders over $99 within the continental U.S.

Freight Delivery

Large systems ship via pallet freight. An adult must be present to inspect and sign.

Inspection

Please inspect your order upon delivery and report any damage within 3 business days.

International Orders

International shipping is available. Duties and taxes are the customer’s responsibility. All international sales are final unless covered by warranty.

Warranty:

At AQUALIVIA™, we stand behind the quality of our water treatment systems. Every product is carefully built to last, and we’re proud to offer strong warranty coverage to give you peace of mind.

What’s Covered

• Mineral Tanks: 10 years (up to 13" × 54"), 5 years for larger tanks.
• Control Valves: 5 years.
• Brine Tanks: 5 years.
• Accessories & Components: 1 year.
• AQUAREX™ Whole House Filter: 5 years.
• OZONEX™ Ozone Systems: 1 year.
• AquaVRay™ UV Systems: 1 year.
• HydroClear™: 1 year(system only)
• AquaRevive™ RO Systems: 1 year(system only)

What’s Not Covered

• Regular-use consumables (filters, resins, membranes, UV lamps, cartridges).
• Damage caused by misuse, freezing, flooding, power surges, or improper installation.
• Products used with non-AQUALIVIA™ parts or outside normal water conditions.

Our Promise

We’ll repair, replace, or provide a comparable solution if your system has a covered defect. Our goal is to make sure your AQUALIVIA™ system works the way it should, so you can enjoy clean, pure water with confidence.

👉 For warranty support, please contact Info@AquaLivia.com.

Maintenance Requirement: