AquaProTec™ Ultra 64K Catalytic Carbon Filter For City

The Invisible Chemical Cocktail in City Water

Municipal water arrives disinfected, but far from finished. Chlorine, volatile organic compounds, herbicides, trihalomethanes, and dozens of synthetic pollutants pass through treatment plants designed decades before these contaminants even existed. You taste chlorine in your morning coffee. You smell it rising from the shower. What you cannot detect are the disinfection byproducts (DBPs) that accumulate in pipes and bind to surfaces long after the chlorine smell fades.

These contaminants do not just affect flavor. They dry skin, damage fixtures, and place hidden strain on appliances. Standard carbon filters reduce some chlorine temporarily but fail to address deeper contamination layers found in modern municipal supplies. That is where AquaProTec Ultra 64K Catalytic Carbon Filter begins, with a 2-cubic-foot catalytic carbon bed engineered not to mask symptoms but to actively oxidize and remove the compounds other systems leave behind. To better understand these challenges, explore our Complete City Water Treatment Systems for Homes designed for comprehensive municipal water improvement.

The Certified Solution: Catalytic Oxidation Meets American Engineering

This is not standard granular carbon. The AquaProTec Ultra 64K employs INDOCARB E124 Catalytic Carbon, a specialized media that actively breaks down chloramines, phenols, PAHs, and disinfection byproducts through enhanced surface reactivity. Unlike traditional carbon that relies solely on adsorption, catalytic carbon accelerates chemical oxidation, neutralizing contaminants at the molecular level before they reach your taps.

Mounted in a durable 12" x 52" mineral tank, the system delivers up to 27 GPM flow at a 15 PSI drop, sufficient for 2-3 bathroom homes without sacrificing pressure during peak demand. The Clack WS1 control valve automates backwash cycles to maintain media performance, extending bed life and ensuring contaminant removal remains consistent year after year. Built in the USA with NSF/ANSI certified components, including NSF Standard 61 compliance and WQA Gold Seal certification, every stage meets the rigorous standards required of professional-grade residential equipment. For deeper insight into the engineering behind this media, visit our Water Treatment Media & Resins collection.

Pure Water Living: The Result You Experience Daily

Water treated through the AquaProTec Ultra 64K no longer carries the sharp bite of chlorine or the lingering haze of chemical residue. Coffee tastes cleaner. Showers feel softer. Ice cubes form clear, not cloudy. Skin retains moisture. Hair responds to conditioning. Fixtures stay cleaner longer. Laundry emerges fresher without absorbing odors.

These are not minor conveniences. They represent fundamental improvements to how your family experiences water every day, across drinking, cooking, bathing, and cleaning. With a service life extending beyond 10 years, the system protects not only your health but also the plumbing, appliances, and infrastructure that depend on clean water flowing through them. Pure Water. Pure Trust.

Completing Your Water Strategy

While the AquaProTec Ultra 64K eliminates chlorine and organic contaminants, it does not address hardness minerals. If your city water also causes scale buildup in pipes, water heaters, or appliances, consider pairing this system with our Whole House Water Softeners for Homes to control mineral deposits and extend equipment lifespan. Complete treatment begins with understanding what your water actually contains, not guessing based on location or reputation.

Performance

• Ideal For: Two-story homes (with standard water pressure 50–70 PSI)
• System Capacity: 64,000 Grains
• Occupants: 2-4
• Household Size: Up to ~2,200 sq ft
• Number of Bathrooms: 2-3
• Media Volume: 2 Cu.Ft
• Media Type: Carbon - INDOCARB® E124
• Service Life: ~ 10-15 years
• Max Flow Rate: 27 gpm at 15 psi drop
• Backwash: 4 gpm

Technical Specifications

• Valve: Clack WS1
• Input & Output Line Size: ¾” or 1” NPT
• Tank Dimensions: 12"x52"
• Product Dimensions: 2"L × 12"W × 59"H
• Product Weight: 93 lb, 43 kg
• Material: N/A
• Power Requirement: 110V Standard (Plug-In Transformer Included)
• Bypass Valve Included: Yes
• Operating Pressures: Standard water pressure 50–70 psi
• Operating Temperatures: 40° - 110° F
• Drain Line: ¾” or 1” NPT

Additional Components

• 1/2" Dia drain line tube 10' in length

Installation Time & Requirements

• Installation Type: Whole-House Point of Entry
• Estimated Installation Time: A professional AquaProTec™ system installation typically takes 2 to 4 hours, but this can vary depending on the complexity of the job and the type of system. Replacing an existing unit might take less time, sometimes as little as an hour, while a new installation with additional plumbing will take longer.

Most AQUALIVIA™ systems are built or assembled to order at our Florida facility.

• Standard orders ship in 2 to 4 business days

• Custom or special systems may require 7 to 10 business days

• Orders placed after 12:00 PM ET process the next business day

Estimated Transit Times (after shipment)

• Ground: 5 to 10 business days

• Freight systems: 5 to 10 business days

Free Shipping

Free standard shipping on orders over $99 within the continental U.S.

Freight Delivery

Large systems ship via pallet freight. An adult must be present to inspect and sign.

Inspection

Please inspect your order upon delivery and report any damage within 3 business days.

International Orders

International shipping is available. Duties and taxes are the customer’s responsibility. All international sales are final unless covered by warranty.

Warranty:

At AQUALIVIA™, we stand behind the quality of our water treatment systems. Every product is carefully built to last, and we’re proud to offer strong warranty coverage to give you peace of mind.

What’s Covered

• Mineral Tanks: 10 years (up to 13" × 54"), 5 years for larger tanks.
• Control Valves: 5 years.
• Brine Tanks: 5 years.
• Accessories & Components: 1 year.
• AQUAREX™ Whole House Filter: 5 years.
• OZONEX™ Ozone Systems: 1 year.
• AquaVRay™ UV Systems: 1 year.
• HydroClear™: 1 year(system only)
• AquaRevive™ RO Systems: 1 year(system only)

What’s Not Covered

• Regular-use consumables (filters, resins, membranes, UV lamps, cartridges).
• Damage caused by misuse, freezing, flooding, power surges, or improper installation.
• Products used with non-AQUALIVIA™ parts or outside normal water conditions.

Our Promise

We’ll repair, replace, or provide a comparable solution if your system has a covered defect. Our goal is to make sure your AQUALIVIA™ system works the way it should, so you can enjoy clean, pure water with confidence.

👉 For warranty support, please contact Info@AquaLivia.com.

Maintenance Requirement: