AQUAREX™ 10” Replacement Sediment Filter 50 Micron

When Household Debris Silently Damages Every System Downstream

Every water supply carries invisible particles that reach your home through aging infrastructure, corroded pipes, or shifting well conditions. Sand, silt, and oxidized minerals move silently through plumbing, scratching valve seats, clogging aerators, and abrading equipment surfaces before visible damage appears. This abrasive wear accelerates inside water heaters, dishwashers, and softeners, reducing efficiency and forcing premature replacement of equipment designed to last decades.

Most homeowners notice sediment only after flow restriction begins or staining becomes visible. By then, particulate wear has already compromised sensitive components. For well water systems managing multiple contaminants, sediment removal becomes the critical first line of defense, protecting downstream treatment media from fouling and ensuring other stages perform as designed.

Graded Density Engineering for Long-Cycle Performance

The AQUAREX™ 10" Replacement Sediment Filter uses graded density polypropylene engineered to capture particles down to 50 microns while maintaining consistent flow rates. Unlike surface-only designs that clog rapidly under household demand, this depth filtration structure distributes debris throughout the entire media thickness, extending service intervals and preventing pressure loss. Built to NSF/ANSI Standards 42, 61, and 372, this filter meets strict criteria for material safety and structural integrity. Made with FDA CFR 21 approved materials, it ensures safe contact with water used for drinking and food preparation.

This filter fits standard 10-inch housings and serves as essential protection for multi-stage treatment systems. By removing suspended solids before water reaches carbon filters, softeners, or UV disinfection units, it prevents fouling and premature media exhaustion. With an operating temperature range of 40°F to 145°F and an initial pressure drop of just 1 psi at 10 gpm, the filter delivers high-capacity dirt removal without restricting household flow or system performance.

Clear Water at Every Fixture, Protected Equipment Long-Term

Once sediment is captured at the source, water flows cleanly to every fixture and appliance in the home. Showerheads and faucets stay free of grit buildup. Washing machines and dishwashers operate without abrasive interference. Water heaters maintain efficiency without sediment accumulation restricting heat transfer. The result is not just clearer water, but a home where every system dependent on clean supply performs as designed.

Regular filter replacement ensures consistent protection without guesswork. The AQUAREX™ 10" filter integrates seamlessly into existing treatment systems, supporting long-term reliability across your entire water supply. Pure Water. Pure Trust.

Completing Your Water Strategy

While sediment filtration protects equipment and maintains flow, it does not address taste, odor, or dissolved contaminants. To ensure your drinking water is as safe as it is clear, consider adding reverse osmosis systems for final purification. When sediment control and targeted drinking water treatment work together, every tap in your home delivers water you can trust.

Performance

• Ideal For: N/A
• Media Type: Graded density polypropylene

Technical Specifications

• Max Flow Rate: 2-8 gpm (Depending on micron rating)
• Micron Rating: 50 Micron
• Operating Temperature: 40 °F to 145 °F (4.4 °C to 62.8 °C)
• Product Dimensions: 4.5"D x 4.5"W x 10"H
• Material: N/A

Installation Time & Requirements

• Estimated Installation Time: ### Installation Time **AQUAREX™ 20” Whole House Sediment Filter Kit (50 Micron)** Typical installation time is **45 to 90 minutes** under standard residential conditions. This assumes: - Existing accessible main line - No major replumbing required - Standard 3/4” to 1” connections - Installer has basic tools and shutoff access More complex installs (tight spaces, copper sweating, adding a bypass loop) can extend time to **1.5 to 2.5 hours**. ### Filter Replacement Time Replacing the sediment filter cartridge typically takes **10 to 20 minutes**. This includes: - Shutting off water and relieving pressure - Opening the housing - Swapping the cartridge - Reinstalling and checking for leaks