WellFusion™ Max 90K Iron & Sulfur Well System

The Hidden Burden of Well Water Without Complete Protection

Private well systems rarely present just one problem. When iron stains sinks orange and sulfur fills the air with rotten egg odors, these issues are not isolated. They combine with sediment fouling and bacteria exposure to create compounding water quality failures. Treating one contaminant while ignoring others leaves plumbing vulnerable and water unsafe. Iron breaker filtration, sulfur neutralization, sediment removal, and ultraviolet disinfection must work together, sized and staged correctly, or the system fails under real household demand.

Hard water minerals complicate iron and sulfur problems further. Calcium and magnesium create scale inside pipes while iron and sulfur corrode fixtures and promote bacterial growth. Standard city water softeners collapse when exposed to untreated well water. Without coordinated filtration and softening, homeowners replace equipment repeatedly, never solving the core issue. Understanding how these contaminants interact is essential before choosing treatment. To better understand these challenges, explore complete guidance on well water treatment systems for homes.

The Engineering Behind WellFusion™ Max 90K

The WellFusion™ Max 90K delivers staged, coordinated treatment designed for severe well water conditions in large homes. Stage one begins with the AQUAREX™ Sediment Filter, capturing sand, silt, and debris before they reach downstream components. Sediment protection extends the lifespan of catalytic carbon and resin media while maintaining consistent flow rates throughout the system.

Stage two employs Katalox Light® Catalytic Carbon inside a 13"×54" tank. This advanced media oxidizes and filters dissolved iron, manganese, and hydrogen sulfide without chemical injection. Katalox Light operates through catalytic oxidation, converting soluble contaminants into filterable particles. This process eliminates metallic taste, rotten egg odors, and the orange staining that damages fixtures and laundry. The media backwashes automatically using the Clack WS1 valve, maintaining efficiency without manual intervention.

Stage three integrates the EVOSOFT™ Water Softener with 90,000-grain capacity using Aldex C-800 8% crosslinked resin. This shallow-shell resin bed removes calcium and magnesium hardness while providing additional iron reduction support. The higher crosslinking density delivers superior regeneration efficiency and extended resin life compared to standard softening media. The system handles high iron loads without fouling, ensuring consistent soft water even under variable well water conditions. For applications requiring alternative approaches, consider salt-free water conditioners for residential homes.

Stage four completes the system with the AquaVRay™ UV Disinfection System, delivering chemical-free microbial protection. Ultraviolet light deactivates bacteria, viruses, and parasites at 99.99% effectiveness without altering water taste or chemistry. UV disinfection provides a final safeguard against biological contamination, ensuring water is safe for drinking, cooking, and bathing. All components are made in the USA and engineered to function as an integrated system, not separate units installed independently.

Pure Water Living Without Compromise

The WellFusion™ Max 90K transforms well water quality across every fixture in the home. Iron stains vanish from sinks and tubs. Sulfur odors disappear from showers and laundry. Water heaters operate efficiently without scale accumulation. Appliances last longer. Skin feels softer after bathing. Soap rinses clean without residue. Drinking water tastes neutral and fresh. Plumbing systems maintain pressure and flow without mineral or sediment restrictions.

This system is designed for three-story homes with standard water pressure (50–70 PSI) and households of 4–6 occupants covering approximately 3,600 square feet. The 27 GPM flow rate at 15 PSI drop supports simultaneous fixture use without pressure loss. Maintenance remains straightforward: add salt as needed, backwash as programmed, and replace UV lamps annually. Resin and media perform reliably for 10–15 years under typical well water conditions. The system includes a bypass valve, drain line, and plug-in transformer. Installation requires ¾" or 1" NPT connections and standard 110V power. For comprehensive well water solutions, explore additional options in well water filtration system bundles for homes.

The WellFusion™ Max 90K does not compromise. It does not treat symptoms while ignoring causes. It addresses iron, sulfur, hardness, sediment, and bacteria simultaneously using proven engineering and precision media. Well water should not limit comfort or safety. This system ensures it does not. Pure Water. Pure Trust.

Performance

• Ideal For: Three-story homes (with standard water pressure 50–70 PSI)
• System Capacity: 90,000 Grains
• Occupants: 4-6
• Household Size: Up to ~3,600 sq ft
• Number of Bathrooms: 4-5
• Media Volume: 2.5 Cu.Ft
• Media Type: Carbon - Katalox Light®, Water Softener - Aldex C-800 8% Crosslinked Resin
• Service Life: ~ 10-15 years
• Max Flow Rate: 27 gpm at 15 psi drop
• Backwash: 5.3 gpm

Technical Specifications

• Valve: WS-Clack WS1 Valve, Carbon Clack WS1 Valve
• Input & Output Line Size: ¾” or 1” NPT
• Tank Dimensions: 13"x54"
• Brine Tank Size: 18"X36" Gray
• Product Dimensions: 66"L × 26"W × 66"H
• Product Weight: 302 lb, 137 kg
• Material: N/A
• Power Requirement: 110V Standard (Plug-In Transformer Included)
• Bypass Valve Included: Yes
• Drain Line: ¾” or 1” NPT

Additional Components

• 1/2" Dia drain line tube 20' in length

Installation Time & Requirements

• Installation Type: Whole-House Point of Entry
• Estimated Installation Time: A professional water softener installation typically takes 3 to 6 hours, but this can vary depending on the complexity of the job and the type of system. Replacing an existing unit might take less time, sometimes as little as an hour, while a new installation with additional plumbing will take longer.